You can find out more about this by clicking here.

• The perfect tool for repairing, rebuilding and reshaping anything
• Filling in the gaps with good properties
• Durable and long-lasting solution
• Easy to use and good adhesive strength – no mess
• tools; painting; supplies; paint; wall; treatments; caulking; adhesives; sealing; epoxy; putty

Product description

Selleys Knead It Steel, a co-extruded, versatile, hand-kneadable epoxy repair system, is non-rusting, fast-setting, and can be used for a variety of surfaces and applications. It is easy to use, has a good adhesive strength, and can be drilled or sawed. Also, it can be filed, tapped, painted, machined, or sanded one hour after mixing. Heat resistant to 140 degrees C, it will not drip or sag. Rapid Set (less that 10 minutes). Use on glass, steel, aluminum, ferrous metals, and most plastics. Plastics must be tested before use. Dark Grey. Size: 110g Tube

What is the best place to use this product?

• Rebuilding engine parts, rusted metal and other items
• How to repair a hole on a fuel tank
• Repair of iron pipes and tools
• Repair stripped threads
• Forming nuts and bolts into place
• Attaching signs and fixtures
• Repairing radiators
• Repairing holes on cars and boats
• Repairing tanks and ducts
• Making prototypes
• Repairing gutters and downpipes
• An anchoring bolt for bolts
• Repairing your metal outdoor furniture

What types of materials can this product be used with?

• Steel
• A wide range of aluminium and ferrous metal items
• Plastics* (pre-testing required)
• Glass

Use

1. Surfaces should be free of dust, grease and dirt. To get the best results, roughen the bond area before cleaning.
2. Remove the required portion. Replace disc on remaining portion. Avoid contaminating your hands by wearing gloves. Mix with your fingers until the colour is uniform. Warm the mixture to room temperature if mixing is difficult. If necessary, apply with pressure on the surface to be repaired within 2 minutes after mixing. Use the plastic wrapper if the material sticks to your fingers.
3. To achieve a smooth finish, remove any excess with a wet cloth or water before the hardening process begins.
4. Trim off any excess material before the initial hardening. Acetone can be used to remove any residues prior to the initial hardening. Once fully cured, the excess can be sanded off or trimmed.
5. After 5-10 mins, Knead It Steel begins to harden and form a strong bond. After 60 minutes, Knead It Steel can be drilled or sanded. It can also be machined, filed, painted, or sawed.
6. After using, wash hands thoroughly with soap & water.

Limitations:

• Plastic fuel tanks are not recommended.
• Does not adhere to polyethylene, polypropylene or Polytetrafluoroethylene (Teflon) or silicone rubber.
• Tested for drinking water compliance to AS/NZ4020:2005.

Handy Tips

• Mix the putty with the hardener. As Knead it is being mixed, you will feel the heat.
• Keep a small amount of Knead It to test when the glue is set. When it becomes hard, your job is complete.
• Keep your products in a cool, dry place to extend their shelf life.
• Use Knead it Multi-Purpose when in contact with drinking waters.
• Knead It aqua is suitable for wet/submerged surfaces.
• Temperatures below 20deC: Set time increases

Clean up

• Remove excess by rubbing your hands with water or using a dampened cloth
  before hardening begins.